A. General

1. Working Pressure Ratings – contains pressure ratings for ends (BSPP, JIC, Code 61 etc)
2. FC Letter of Conformity – List of standards / specifications of FC parts
3. ISO 9001:2015 Certificate – FC is certified and assessed annually to ISO 9001:2015 Quality Management System

B. Adaptors and Fittings

1. Adaptor and Fitting Operating Temperatures
2. WEO Assembly Guide – for “PIM” and “PIF” fittings
3. Swivel Range Disclaimer – please read this if using “SWV” swivel fittings

C. Hydraulic Tube and Cutting Sleeves

1. Hydraulic Tube Technical Data – also contains a list of compatible nuts and sleeves
2. JCN & JCS Flareless Tube Assembly Procedure – applies to “JCS” and “JCN” fittings only
3. Metric Tube Assembly instructions  - applies to metric tube fittings only

D. Couplers and Valves

1. Check Valve Technical Data – for “CHK” series
2. Pattern Changer Technical Data – for “PAT-CH” series
3. Pattern Change ISO to Hitachi Schematic – needs 2 pattern changers “PAT-CH”
4. Test 20 Test-Point Couplings – ISO 15171-2 test-point couplings “TP-T20”

1. QAF / QAM Technical Data – standard ISO A quick release couplers
2. QAF-PC / QAM-PC Technical Data – pull-break couplers
3. QAF-PPB Technical Data – 1/2" connect-under-pressure couplers
4. QAF-PPS Technical Data – 1/2" push-pull couplers
5. S-QAF / S-QAM Technical Data – stainless ISO A quick release couplers

1. QBF / QBM Technical Data – standard ISO B quick release couplers
2. S-QBF / S-QBM Technical Data – stainless ISO B quick release couplers

1. QDF Poppet / QDM Poppet Technical Data – DIN couplers with poppet valve
2. QDF Ball / QDM Ball Technical Data – DIN couplers with ball valve

1. QFF-HQ / QFM-HQ Technical Data – standard ISO 16028 flat-face couplers
2. QFF-PC / QFM-PC Technical Data – ISO 16028 connect-under-pressure flat-face couplers
3. QFF-HFT / QFM-HFT Technical Data – for "HFT" series flat-face screw couplers
4. HFT Series Couplers Technical Alert – please read this if using our HFT Series couplers

1. QSF-HS / QSM-HS Technical Data – standard ISO 14541 screw couplers
2. QSF-HSC / QSM-HSC Technical Data – heavy duty ‘demolition’ screw couplers
3. QJF / QJM Technical Data – high pressure screw ‘jacking’ couplers
4. TBF / TBM Technical Data – ISO 5676 trailer brake couplers

E. Hoses

1. Swaging Diameters – guide chart of crimp diameters
2. ContiTech Swaging Diameters – guide chart of crimp diameters of FC hose tails with ContiTech hose

3. Crimping FC Tails on Other Manufacturers Hoses - please read this if using non-FC hoses with FC hose tails

4. R2AT Technical Data – for “HSE-R2AT” hoses
5. R12 Technical Data – for “HSE-R12” hoses
6. R15 (ContiTech) Technical Data - for “C-HSE-R15” hoses
7. R16 Technical Data – for “HSE-R16” smooth cover hoses
8. R17 Technical Data – for “HSE-R17” hoses

1. Hose Reel Technical Data

1. Burst Sleeve Technical Data - for "Hose-BS" burst sleeve product
2. Burst Sleeve Crimp Rings – instructions on how to use our crimp rings to hold burst sleeve in place (without affecting the crimp ferrule)

1. Grease Hose Technical Data – for “HSE-Grease” hoses – also contains grease hose assembly instructions
2. Grease Swivel hose tail Disclaimer – please read this if using “SWV-RGT” swivel grease tails

F. Miscellaneous

1. Manifold block dimensions - for "MFD" manifold blocks

For further help don't hesitate to Contact Us.

Need other downloads?
Please let us know what you need and help us improve - call, email or leave a message on our Contact Us page.